Tank Sun Protection Measures
1. Tank Sun Protection
- Apply a highly reflective sunscreen coating to the tank to reflect sunlight and lower internal temperature
- Use breathable, UV-resistant tarpaulin with ventilation holes for long parking periods
- Secure tarpaulin edges to prevent wind displacement
- Regularly inspect paint integrity, especially on sun-exposed areas (top and sides)
- Reapply peeling paint immediately
2. Parking Methods
- Prefer shaded locations (awnings, near warehouses)
- Position tank's longest side away from sun to minimize exposure
- Avoid outdoor parking during midday to afternoon peak sunlight hours
- Use temporary reflectors on tank roof when shade unavailable
- Place wooden planks under wheels on asphalt to isolate ground heat
3. Component Protection
- Install fiberglass thermal insulation covers on valves and pipelines
- Use UV-resistant sleeves for hoses
- Regularly replace joint sealing rings to prevent hardening/leakage
- Add small sunshade on roof to protect pressure/level gauges
4. Maintenance Routine
- Weekly cleaning of tank surface with soft cloth to maintain reflectivity
- Monthly inspection of tarpaulin for wear and tear
- Quarterly temperature checks at different times
- Upgrade sun protection if cooling effectiveness reduces
- Perform rust-proofing on sunshade components
Note: Consistent implementation of these measures will significantly reduce fuel evaporation losses and maintain optimal tank conditions in high-temperature environments.