To ensure safe operation and prevent equipment damage, a comprehensive inspection must be performed before using any portable fuel tank. All checks should be thorough and meticulous—if any hazard is identified, do not use the tank until repairs or replacements are completed.
Carefully inspect the tank's outer surface for damage, cracks, or dents. Pay special attention to corners and weld seams, as these areas are prone to impact damage or fatigue.
Check for material deterioration such as fading, brittleness, or signs of aging. Any visible defect may lead to fuel leakage—immediately discontinue use if problems are found.
Inspect all sealing gaskets on the tank cap for integrity—ensure no deformation, detachment, or damage exists.
After tightening the cap, gently shake the empty tank to check for gaps at connection points. Also examine fuel outlets, valves, and joint seals for secure installation and absence of aging or failure.
Check all connecting pipes, fittings, and components for secure attachment, looseness, damage, or blockage.
Verify that valves operate smoothly, seal completely when closed, and open without sticking. If pressure gauges or monitoring devices are present, ensure pointer sensitivity, accurate readings, and no fault indicators.
Open the tank cap and inspect the interior for impurities, sediment, or moisture. Foreign materials can clog fuel lines, affect performance, and damage equipment.
If cleaning is required, use appropriate tools gently to remove debris without damaging the inner walls. Ensure the interior is completely clean before use.
Never use a tank that fails any inspection point. Immediately repair or replace defective components before putting the tank into service. Regular inspections and proper maintenance are essential for safe, stable operation and accident prevention.